Top Trucking Schools Bakersville NC

How to Select the Best Truck Driver School near Bakersville North Carolina

tractor truck in Bakersville NC Congrats on your decision to become a truck driver and enroll in a CDL school near Bakersville NC. Maybe it has always been your ambition to hit the open highway while operating a monster tractor trailer. Or maybe you have conducted some analysis and have found that a career as a truck driver provides good income and flexible work prospects. No matter what your reason is, it’s imperative to obtain the appropriate training by picking the right CDL school in your area. When evaluating your options, there are certain variables that you’ll need to consider prior to making your ultimate choice. Location will no doubt be an issue, especially if you need to commute from your Bakersville residence. The expense will also be of importance, but picking a school based only on price is not the best means to make sure you’ll get the appropriate training. Don’t forget, your objective is to master the skills and knowledge that will enable you to pass the CDL exams and become a qualified truck driver. So keeping that purpose in mind, just how do you choose a truck driving school? The answer to that question is what we are going to discuss in the rest of this article. But first, we are going to talk a little bit about which CDL license you will ultimately need.

Which Commercial Drivers License Will You Need?

Bakersville NC long haul tractor trailerTo operate commercial vehicles legally within the USA and Bakersville NC, a driver must get a CDL (Commercial Driver’s License). The three classes of licenses that one can apply for are Class A, Class B and Class C. Since the topic of this article is how to choose a truck driving school, we will focus on Class A and Class B licenses. What distinguishes each class of CDL is the kind of vehicle that the driver can operate in addition to the GVWR (Gross Vehicle Weight Rating) or GCWR (Gross Combination Weight Rating). Following are brief descriptions for the two classes.

Class A CDL. A Class A CDL is required to operate any vehicle that has a GCWR of greater than 26,000 lbs., including a towed vehicle of greater than 10,000 lbs. A few of the vehicles that operators may be able to drive with Class A licenses are:

  • Interstate or Intrastate Tractor Trailers
  • Trucks with Double or Triple Trailers
  • Tanker Trucks
  • Livestock Carriers
  • Class B and Class C Vehicles

Class B CDL. A Class B CDL is needed to drive single vehicles having a GVWR of more than 26,000 lbs., or a GCWR of more than 26,000 lbs. including a towed vehicle weighing up to 10,000 lbs. A few of the vehicles that drivers may be qualified to operate with Class B licenses are:

  • Tractor Trailers
  • Dump Trucks
  • Cement Mixers
  • Large Buses
  • Class C Vehicles

Both Class A and Class B Commercial Drivers Licenses might also require endorsements to drive certain types of vehicles, such as school or passenger buses. And a Class A licensee, with the appropriate needed endorsements, may operate any vehicle that a Class B licensee is authorized to drive.

Click Here to Get Free Information on Truck Driving Schools Near You!

How to Evaluate a Truck Driving School

Bakersville NC truck driving schoolAfter you have determined which Commercial Drivers License you would like to pursue, you can begin the undertaking of researching the Bakersville NC truck driving schools that you are considering. As already mentioned, location and cost will certainly be your initial concerns. But it can’t be emphasized enough that they should not be your only concerns. Other factors, including the reputations of the schools or the experience of the instructors are equally or even more important. So below are some more things that you need to research while carrying out your due diligence prior to choosing, and particularly paying for, your truck driver training.

Are the Schools Accredited or Certified ? Very few truck driving schools in the Bakersville NC area are accredited because of the demanding process and cost to the schools. On the other hand, certification is more prevalent and is provided by the Professional Truck Driver Institute (PTDI). A school is not required to become certified, but there are several advantages. Prospective students recognize that the training will be of the highest caliber, and that they will be given an ample amount of driving time. For example, PTDI calls for 44 hours of actual driving time, not simulations or ride-alongs. So if a school’s course is certified (the course, not the school is certified), students know that the curriculum and training will meet the very high standards set by PTDI.

How Long in Operation? One indicator to help assess the quality of a truck driver school is how long it has been in business. A negatively ranked or a fly by night school typically will not stay in business very long, so longevity is a plus. On the other hand, even the top Bakersville NC schools had to begin from their first day of training, so consider it as one of several qualifiers. You can also ask what the school’s history is regarding successful licensing and employment of its graduates. If a school won’t provide those stats, look elsewhere. The schools should also have relationships with local and national trucking firms. Having a large number of contacts not only confirms a superior reputation within the trade, but also bolsters their job assistance program for students. It also wouldn’t hurt to get in touch with the North Carolina licensing authority to confirm that the CDL trucking schools you are reviewing are in good standing.

How Effective is the Training? As a minimum requirement, the schools must be licensed in North Carolina and employ instructors that are experienced and trained. We will cover more about the teachers in the following segment. In addition, the student to instructor proportion should not be higher than 4 to 1. If it’s any higher, then students will not be obtaining the personalized attention they will need. This is especially true concerning the one-on-one instruction for behind the wheel training. And watch out for any school that professes it can teach you to drive trucks in a comparatively short time frame. Training to be a truck driver and to drive a tractor trailer skillfully takes time. Most Bakersville NC schools offer training courses that run from 3 weeks to as long as two months, depending on the class of license or kind of vehicle.

How Experienced are the Teachers? As already mentioned, it’s important that the instructors are qualified to teach driving techniques and experienced as both drivers and instructors. Even though a number of states have minimum driving time criteria to be certified as an instructor, the more successful driving experience a teacher has the better. It’s also vital that the instructors keep up to date with industry advancements or any new laws or changes in regulations. Assessing teachers may be a little more intuitive than other standards, and possibly the ideal approach is to pay a visit to the school and talk to the instructors face to face. You can also speak with some of the students completing the training and find out if they are satisfied with the level of instruction and the teacher’s ability to train them.

Enough Driving Time? Above all else, a good truck driver school will furnish plenty of driving time to its students. Besides, isn’t that what it’s all about? Driving time is the actual time spent behind the wheel operating a truck. While the use of simulators and ride-a-longs with other students are important training methods, they are no replacement for actual driving. The more training that a student gets behind the wheel, the better driver she or he will be. And even though driving time differs among schools, a reasonable benchmark is 32 hours at a minimum. If the school is PTDI certified, it will furnish at least 44 hours of driving time. Contact the Bakersville NC schools you are looking at and find out how much driving time they provide.

Are they Independent or Captive ? It’s possible to obtain free or discounted training from a number of trucking schools if you enter into an agreement to drive for a particular carrier for a defined period of time. This is called contract training, and the schools that offer it are called captives. So instead of having affiliations with a wide range of trucking lines that they can refer their students to, captives only work with one company. The tradeoff is receiving free or less expensive training by giving up the freedom to initially work wherever you choose. Clearly contract training has the potential to limit your income opportunities when starting out. But for some it may be the best way to receive affordable training. Just be sure to ask if the Bakersville NC schools you are considering are independent or captive so that you can make an informed decision.

Provide Onsite CDL Testing? There are several states that will permit 3rd party CDL testing onsite of trucking schools for its graduates. If onsite testing is allowed in North Carolina, ask if the schools you are reviewing are DMV certified to offer it. One advantage is that it is more convenient than contending with graduates from competing schools for test times at North Carolina testing facilities. It is moreover an indication that the DMV considers the approved schools to be of a superior quality.

Are the Class Times Flexible? As earlier mentioned, CDL training is just one to two months in length. With such a brief term, it’s imperative that the Bakersville NC school you select offers flexibility for both the scheduling of classes and the curriculum. For example, if you’re having a hard time learning a certain driving maneuver, then the instructor should be prepared to dedicate more time with you until you have it mastered. And if you’re still holding a job while going to training, then the class scheduling must be flexible enough to fit in working hours or other responsibilities.

Is Job Placement Provided? The moment you have acquired your commercial driver’s license after graduating from truck driving school, you will be keen to begin your new profession. Verify that the schools you are reviewing have job assistance programs. Find out what their job placement ratio is and what average salary their graduates start at. Also, find out which local and national trucking firms their graduates are placed with for employment. If a school has a poor job placement rate or few Bakersville NC employers recruiting their graduates, it may be a sign to search elsewhere.

Is Financial Aid Available? Truck driving schools are similar to colleges and other Bakersville NC area trade or technical schools when it comes to loans and other forms of financial aid being available. Find out if the schools you are evaluating have a financial assistance department, or at least someone who can help you get through the options and forms that must be submitted.

Top Trucking Schools Bakersville North Carolina

Bakersville NC long haul truckSelecting the ideal truck driver school is an essential first step to beginning your new vocation as a local or long distance truck driver. The skill sets taught at school will be those that mold a new career behind the wheel. There are a number of options available and understanding them is critical if you are going to succeed as an operator.  You originally came to our website because of your interest in Top Trucking Schools and wanting information on the topic Obtaining A CDL.  However, you must receive the proper training in order to operate a large commercial vehicle in a safe and professional fashion. If you are short on money or financing, you might need to consider a captive school. You will pay a reduced or in some cases no tuition in exchange for driving for their contracted carrier. Or you can choose an independent trucking school and have the the freedom to drive for the trucking firm of your choosing, or one of several associated with the school. It’s your decision. But regardless of how you obtain your training, you will in the near future be part of a profession that helps our country move as a professional truck driver in Bakersville NC.

Truck On in These Other North Carolina Locations

  • CDL License Classes Wise NC
  • Cost Of Truck Driving School Woodleaf NC
  • CDL License Requirements Tillery NC
  • Truck Driving CDL Training Salisbury NC
  • CDL Training Requirements Chinquapin NC
  • Semi Truck Driving School Lake Toxaway NC
  • CDL License School Harrells NC
  • Truck School Driving Kenansville NC
  • Dump Truck Driver Training Yadkinville NC
  • Commercial Driver Training Whitsett NC
  •  

     

    The location could not be found.

     

    Bakersville, North Carolina

    In prehistoric times, local mica deposits were extensively mined by Native Americans. The first Euro-American settlers arrived in the area after the American Revolution, establishing scattered homesteads. The town of Bakersville dates from the 1850s[5] and was named for David Baker, one of the first to live in the area around 1790 and described as "a large land owner, innkeeper, merchant and political leader until about 1859, when he and his family migrated to the far west."[6] Situated on the main route leading over Roan Mountain and westward into Tennessee, the town developed slowly. Traveler Frederick Law Olmsted passed through Bakersville in the early 1850s and noted that the "town" consisted of only a couple of cabins within a quarter-mile radius.[5] In 1861, a post office was established and named Davis after Jefferson Davis.[6] Following the Civil War, the county seat of newly created Mitchell County was relocated to the town that had been renamed Bakersville by the Republican state government,[6][5] leading to the construction of a courthouse and a growth in population. In the 1870s, as mica became commercially valuable, the rich local deposits of the mineral caused a temporary economic boom.[5] Bakersville is also home to the North Carolina Rhododendron Festival. The pageant attracts visitors from across the state and nation, most notably Richard Nixon in 1968.

    According to the United States Census Bureau, the town has a total area of 0.8 square miles (2.1 km2). Bakersville is a small town, and is the county seat of Mitchell County located approximately 50 miles northeast of Asheville and 25 miles southeast of Johnson City, TN. It has one public primary and middle school with approximately two hundred students.

    As of the census[2] of 2000, there were 357 people, 168 households, and 97 families residing in the town. The population density was 474.4 people per square mile (183.8/km²). There were 206 housing units at an average density of 273.8 per square mile (106.0/km²). The racial makeup of the town was 99.72% White and 0.28% Native American. Hispanic or Latino of any race were 0.28% of the population.

     

    Business Results 1 - 10 of 4

    Budget Truck Rental
    1 Reviews
    Phone:
    601 N Roan St, Johnson City, TN 37601

    Doozy Truck Center
    2 Reviews
    Phone:
    2230 S Roan St, Johnson City, TN 37601

    All Metals Fabricators & Millwright Service
    1 Reviews
    Phone:
    131 Spears Ave, Elizabethton, TN 37643

    Appalachian Gypsum
    1 Reviews
    Phone:
    1210 Persimmon Ridge Rd, Jonesborough, TN 37659